LOW Dew Point Heatless Desiccant Adsorption Compressed Air Dryer For CEMS
Unique
We are the factory, only produces the smallest air dryer, we are the only smallest air dryer manufacturers
Every year, 80% of the loss of pneumatic components are due to the use of unclean and not dry gas medium
But the general automation equipment of air consumption is only around 0.3 cubic minutes
The Air Dryer on the market is more than 1 cubic per minute, the volume is the size of a table, high prices, and difficult to match with automation equipment
Our adsorption dryer is suitable for automatic products, can be used as a pneumatic accessories, installed next to the automation equipment.
Product advantages
1.High quality adsorbent, stable dew point
* 30% residual filling is anti-aging, which can easily cope with short period of severe working conditions;
* 3.0mm diameter, larger active surface area, high strength, good water resistance
2.High reliability design, stable and reliable performance, minimal maintenance
* Excellent simplified design to ensure no less than 5.2 seconds of contact time;
* Layered dense filling process, low risk of adsorbent wear, long life, reliable dew point;
* with low risk of leakage, long life and less maintenance
Apply
Adsorption air dryer is suitable for flue gas detection, environmental detection and laboratory and other special requirements of the dryer, to meet the requirements of users to remove carbon dioxide, hydrogen sulfide in the product gas.
| Item No. | YS-1 | YS-2 | YS-3 |
| Dew Point Temperature | -40°C |
| Processing Capacity* | 100L/min | 200L/min | 400L/min |
| Regeneration Capacity | 15L/min | 30L/min | 90L/min |
| Power Voltage | 220v,50/60Hz(110v as customize) |
| Power | 10W | 10W | 10W |
| Working Pressure | 0.25≤P≤1.0MPa |
| Inlet Temperature | ≤35℃ |
| Inlet / Outlet connector | PT1/2 |
| Overall Dimensions | 192*436*86mm | 192*516*86mm | 242*586*126mm |
FAQ
1. Are you a Manufacturer or Trade company ?
We are a professional manufacturer of compressed air dryer ,found in 2017.
2. Could I use my own logo or design on goods?
Yes, customized logo and design on mass production are available.
3. What's the delivery time?
Within 15-30 working days after receiving deposit.
4. OEM or customized orders are welcome.
Product Tags:
|
|
Adsorption Compressor Dry Air System Unit CEMS LOW Dew Point Heatless Desiccant Images
|
